4.2 Installing and setting up SIMEOX

1

Place SIMEOX on a stable, hard, flat surface.

3

Connect the power cable supplied to a power

outlet.

2

Check that the air intake areas on the front and

underneath SIMEOX are not blocked. Air must

circulate freely all around and under the device;

Connect the power cable to SIMEOX.

4

Turn on the device by setting the power switch on

the back of the device to position “1”. The light of

the “standby/on” button of the control pad turns

yellow-orange. Your SIMEOX is in “standby” mode

and ready to be used.

22