www.brammer.biz www.brammer.bizwww.brammer.biz

1

H and

Tools & S

torage

Pullers And Bearing Tools - Pulling Plate | Seperator | Threaded Inserts | Bearing Installation

SKF EasyPull - Hydraulic Jaw Puller

7644

Ready-to-use, integrated hydraulic cylinder, pump and puller thus it is assembly-free and it is not necessary to purchase separate parts Safety valve prevents spindles and pullers from being overloaded if excessive force is applied The spring-loaded centre point on the hydraulic spindle allows easy centring of the puller on the shaft without damaging the shaft The TMMA 100H has a maximum withdrawal force of 100 kN (11.2 US ton) and a long stroke of 80 mm (3.1 in.), which facilitates most dismounting jobs in just one operation For dismounting jobs requiring less force, SKF offers a 75 kN (8.4 US ton) version, the hydraulic EasyPull TMMA 75H with a maximum stroke of 75 mm (3 in.) Supplied with extension pieces and one nosepiece

Order Code Item Description Puller Leg Reach

Puller Leg Reach Range

C1464974 SKF EasyPull - Hydraulic jaw puller 52-200mm

200.0 mm 52-200 mm

C1464961 SKF EasyPull - Hydraulic jaw puller 75-250mm

250.0 mm 75-250 mm

1.38 Separator Pullers

6446

These separator pullers are used together with the bearing separators 1.40 The tension bolts are screwed into the threaded holes in the bearing separators

Order Code Driver Size Puller Leg Min Max

Puller Leg Reach

Screw Thread Type Size

C2711080 17.00 mm 40-120 125.0 mm M10 / M12x1.5

C2711081 19.00 mm 60-165 180.0 mm M10 / M14x1.5

C2711082 22.00 mm 70-215 195.0 mm M14x1.5 / M16x1.5

C2711083 27.00 mm 90-300 205.0 mm M18x1.5 / M20x1.5

1.81 Set Of Threaded Inserts With Slide Hammer

6447

The threaded inserts make the removal of threaded caps, for example, possible, when these possess one threaded hole No. 1.81/K-12: With sliding hammer 1.35/1A, rod 230 mm and impact weight 700 g, adaptor M14x1,5 No. 1.81/K-112: With sliding hammer 1.35/1A, rod 230 mm, impact weight 200 + 700 g, adaptor M14x1,5 In robust plastic case, 275 x 229 x 83 mm

Order Code Brand Item Name

C3582868 1.81/K-112

C2702372 1.81/K-12

1.85/1 Professional Plastic Bearing Installation Set

6448

The impact-resistant plastic is handily light, but just as robust as the metal variants Using this bearing installation set more than 200 types of bearings may be re-installed effortlessly and without damage Set comprises: 33 impact rings 3 aluminium impact sleeves,10-50 mm for external Ø 26-110 mm 1 recoil-free bodywork hammer with nylon heads In a strong plastic case, dimensions 450 x 360 x 140 mm

Order Code

C2700611

Bearing Fitting Tool

7623

Poor fi tting, usually using brute force, accounts for 16% of premature bearing failures. The SKF Bearing Fitting Tool Kit TMFT 36 is designed for quick and precise mounting of bearings, while minimising the risk of bearing damage. The right combination of impact ring and sleeve allows effective transmission of mounting force to the bearing ring with the interference fi t, minimising the risk of damaging the bearing s raceways or rolling elements. The kit contains 36 impact rings, 3 impact sleeves and a dead- blow hammer packed in a lightweight carrying case. In addition to mounting bearings, the SKF TMFT 36 is also suitable for mounting other components such as bushings, seals and pulleys.

Order Code Bore Diameter Range Diameter Range

C1464804 10-55 mm 26-120 mm

217