www.brammer.bizwww.brammer.biz www.brammer.biz

1

H an

d T

oo ls

& S

to ra

ge

Pullers And Bearing Tools - Ball Bearing Pullers

1.92/12 Patented Ball Bearing Set Of Pullers Plus

6449

Using the ball bearing extractor, the removal of shaft-mounted ball bearings in a housing is now possible without any problems Due to its great degree of functionality combined with the simplifi ed handling, this design makes a PLUS in effectiveness and productivity possible This tool is easy to use: The legs are fi xed in the slot The self-locking arrangement means that the force applied is 100 % utilised Secure at all times against slipping off - and a straight pulling force for precise working Patented system Suitable for more than 40 standard ball bearings up to 6311 1.92/1 for bearings: 6000-6010, 6200-6205, 6300-6304 1.92/2 for bearings: 6011-6012, 6206-6212, 6305-6311, 6403-6407 1.92/12 contains set 1.92/1 and 1.92/2 * with supporting ring 6309 ** with supporting ring 6310 *** with supporting ring 6311

Order Code Contents

C1450066 Set 1.92/1 and 1.92/2

6445

Suited for the removal of small ball bearings since there is often not enough room for counter-support braces

1.35 Impact Bearing Pullers

Order Code Driver Size For Use With Impact Weight

Overall Length

Screw Thread Type Size

C2702369 13.00 mm 1.34/1 - 1.34/4 200.0 g 180.0 mm M10

C2702367 13.00 mm 1.30/0 - 1.30/5 1.34/1 - 1.34/4 200.0 g 230.0 mm M10

C2702368 13.00 mm 1.30/0 - 1.30/7 700.0 g 230.0 mm M10

C1450062 24.00 mm 1.30/0 - 1.30/9 1700.0 g 500.0 mm M14x1.5

C2702370 24.00 mm 1.30/6 - 1.30/10 3000.0 g 500.0 mm M14x1.5

7662

The puller is suitable for use in both blind housings and shaft applications. The SKF TMMD 100 is suitable for dismounting up to 71 different SKF deep groove ball bearings, with shaft diameters ranging between 10 and 100 mm (0.4 3.9 in.).

The claws are designed to precisely fi t in the bearing s raceway, providing a good grip, thereby allowing high dismounting forces Each puller arm is fi tted with a spring for easy installation The claw has been designed to allow easy insertion The hexagon head of the spindle is designed to prevent the spanner sliding down the spindle during dismounting The puller can also be used to remove sealed bearings from blind housings, after the seal has been removed

Deep Groove Ball Bearing Puller Kit

Order Code Bore Diameter Range

Puller Leg Reach Range

C1465001 10-100 mm 135-170 mm

Internal Bearing Puller Kit

7663

The SKF TMIP kits are specially designed for dismounting bearings from housings where the fi t is on the outer ring. The combination of unique spring-loaded extractors and an ergonomically designed sliding hammer help enable a safe, fast and easy removal of the bearing. Unlike other internal bearing pullers, the extractors can be correctly positioned in just one quick action.

Unique design saves dismounting time Easy removal of bearings from housings Designed to suit a wide range of bearing bore diameters; the selection of extractors is easy Puller constructed for optimum strength and durability Spring loaded extractors allow quick and easy fi tting of the extractor to the inner ring Claw design provides a strong and secure grip behind the inner ring, allowing a high puller force to be applied Ergonomic sliding hammer enhances user safety SKF design, patent pending

Order Code Bore Diameter Range

C1464943 7-28 mm

C1464942 30-60 mm

Blind Housing Puller Kit

7660

Allows a wide of range of deep groove ball bearings to be dismounted Ball adapters designed for a long service life Spanner stop function on spindle for easy and safe handling Self-locking nose piece helps minimise damage to shaft, and improves puller stability

Order Code Bore Diameter Range Puller Leg Reach

C1464542 30-160 mm 547.0 mm

218