www.brammer.bizwww.brammer.biz www.brammer.biz

7

Lu b

ric an

ts , O

ils &

G re

as es

Anti-Seize / Release and Assembly Pastes

Molykote® CU-7439 Plus Paste

8888

Copper paste for components subjected to high temperatures, high pressures and corrosive infl uences. Well suited for all areas which need to be protected against water, steam and corrosion, e.g. brake mechanisms, fl ange seals, exhauster bolts. Good pressure resistance. Very adhesive and resistant against water wash-out. Good corrosion protection. Low evaporation. No drop point. Temperature Range: From -30 to +300°C as a paste, up to +650°C as a dry solid lubricant.

Order Code Volume Pack Type

C4193603 100.0 g Tube

C4193600 500.0 g Tub

C4193599 1.0 kg Tub

C4193602 5.0 kg Pail

C4193601 25.0 kg Pail

C4193598 400.0 ml Aerosol

Molykote® U-n Paste

8886

Solid lubricant paste with synthetic carrier oil. For assembling, running-in and permanent lubrication of components that are subjected to high temperatures. Suitable for the dry lubrication of bearings (low rotary speeds), slideways and joints that are subjected to temperatures exceeding 200°C. At higher temperatures the carrier volatilizes leaving virtually no residue, and the remaining dry, antifriction fi lm alone takes over the only lubrication up to +450°C: even beyond this in a protective gas atmosphere. As the paste has a synthetic oil base, it is also suitable for lubricating construction elements that consist of materials that are not resistant to mineral oils.

Reduced friction and wear Low coeffi cient of friction High load-carrying capacity Compatible with some types of natural rubber

and plastics (test for compatibility required before use).

Temperature Range: From -40 to +450°C, up to +630°C with restricted air access

Order Code Volume Pack Type

C4193597 50.0 g Tube

C4193595 1.0 kg Tub

C4193596 25.0 kg Pail

Molykote® Multigliss

8974

Dispersion with penetrating properties. Diffi cult dismantling owing to corrosion and rust.

Good penetration Rust-loosening properties Lubrication Temperature Range: From -50 to +50°C

Order Code Volume Pack Type

C4193726 500.0 ml Tub

C4193729 5.0 l Pail

C4193728 200.0 l Drum

C4193727 400.0 ml Aerosol

Molykote® Omnigliss

8993

Quick-action penetrating agent incorporating corrosion protection, water-repellent and lubricating properties. Suitable for frictional contacts, running at low to medium speeds, which are not equipped with grease nipples or oiling holes; Used on joints, levers, chains and other components of transport and conveyor equipment, textile machinery, automatic fi lling units and all types of packaging equipment.

Good penetration Water-repellent High pressure resistance Temporary corrosion protection Temperature Range: From -30 to +80°C

Order Code Volume Pack Type

C4193731 5.0 l Pail

Molykote® Supergliss

8998

Lubricating oil with penetrating properties. Simplify dismantling of rusty components. Used as corrosion protection.

Good penetrationc Rust loosening properties Lubrication Corrosion protection Temperature Range: From -50 to +50°C

Order Code Volume Pack Type

C4193733 200.0 l Drum

608