www.brammer.biz www.brammer.bizwww.brammer.biz

2

Test & M

easurem ent E

q uip

m ent

Calibrator

10829

The 707 is the quickest and the easiest to use, with the most features, the best resolution and accuracy. Intuitive user interface combines the best features of dial and button based calibrators. Measure mA and volts accurately to test and calibrate mA control loops. Source / simulate mA to test4-20mA devices such as valve positioners or input cards to PLCs. Perform fast linearity tests with 25% and 100% stepping. Conduct remote tests with auto-step and auto- ramp features. Power transmitters using loop supply with simultaneous mA measurement. Small, streamlined shape, with protective holster, makes it easy to carry. Industry leading mA performance with 0.015% accuracy and Ø .001mA resolution. Rugged and reliable. Ex version available.

Loop Calibrator 707

Order Code

C3953047

Battery Running Time 18 Hours typical,at 12mA

DC Current Range 0 to 24mA

DC Voltage Range 0 to 28 V

10837

The Fluke 787 process technicians tool combines a DMM and a loop calibrator. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offl ine transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.

Fluke 789 features 0.1% dc voltage accuracy, 0.05% dc current accuracy. Frequency measurement to 20 kHz. Min/Max/Average/Hold/Relative modes . Diode Test and Continuity Beeper. Simultaneous mA and % of scale readout. 20 mA DC current source / loop calibrator / simulator. Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp . Externally accessible battery for easy battery changes. 24 V Loop power supply. Large dual display. Enhanced backlight with 2 brightness settings. 1200 Ohm drive capability on mA source. HART mode setting with loop power and a built-in 250 ohm resistor. 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check. Externally accessible fuses for easy replacement. Infrared-port to process data in FlukeView Forms (V2.1) software.

Fluke 787 & 789 DMM & Process calibrator

Order Code Model number

C3953692 787

C3955689 789

Model number 787 789

AC Voltage Range 1000 V 1000 V

Basic DC Accuracy 0.001 0.001

DC Current Range 30 mA to 1 A

DC Voltage Range 1000 V 1000 V

Display Counts 4000 4000

Frequency Range 20KHz 20KHz

Resistance Range 40MΩ 40MΩ

True RMS Readings AC AC

337