www.brammer.biz www.brammer.bizwww.brammer.biz

1

H and

Tools & S

torage

Pullers And Bearing Tools - Combi Kit | Internal Extractor | Shaft Alignment | Belt Alignment

Combi Kit

7636

The SKF TMMK 10-35 is designed for quick and precise mounting of bearings with bore diameters from 10 to 35 mm and for dismounting deep groove ball bearings from shafts, housings and blind housings from the same range. For mounting, a multipurpose fi tting tool is included which is suitable for mounting bearings as well as bushings, seal rings, belt pulleys and other similar products. For dismounting of deep groove ball bearings from blind housings and shafts, the SKF TMMK 10-35 contains a unique three-armed puller. When dismounting deep groove ball bearings from housings, a combination of this puller, sliding hammer and support rings enables easy removal of the bearings.

Order Code

C1465008

1.34 Internal Extractor

6443

For use with sliding hammer no. 1.35/0 or counter-support brace no. 1.36/1 Multiple wrench size (11+ 13 mm) DBGM (German utility patent)

Order Code Size Range

C2711154 5.0-8.5 mm

C2711155 8.0-15.0 mm

C2711156 15.0-25.0 mm

C2711157 25.0-36.0 mm

1.34/10 Internal Extractor Set

6444

For tightly-fi tting ball bearings, bearing races, bushings and shaft seals Titanium-nitrided surface Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extracted. The counter-support brace or the sliding hammer is then added. Contents in practical case: 4 internal extractors: 1.34/1 (5-8.5 mm) 1.34/2 (8-15 mm) 1.34/3 (15-24 mm) 1.34/4 (25-36 mm) 1 sliding hammer 1.35/0 Multiple wrench size (11+13 mm) M10 connecting thread

Order Code Contents

C1450061 1.34/1 (5-8.5 mm) 1.34/2 (8-15 mm) 1.34/3 (15-24 mm) 1.34/4 (25-36 mm) 1.35/0

Shaft Alignment Tool

7377

Alignment actions displayed: clear real time coupling and feet values, given during the alignment process, makes alignment corrections quick and easy Soft foot check: soft foot function helps check if the machine is standing evenly on all feet; an essential check for good shaft alignment Easy for inexperienced users: quick start guide allows virtually any technician to quickly be familiar with the process. Full multi-lingual instructions, instructional video and alignment report forms supplied on a CD The attractively priced TKSA 20 virtually assures a short payback time on the investment

Order Code Description

C2430034 LaserShaftAlignmentK

Advance Shaft Alignment Tool

7380

Alignment actions displayed: Clear real time coupling and feet values, given during the alignment process, makes alignment corrections quick and easy Built-in alignment recommendation: Pre and user defi nable tolerance tables greatly simplify assessment of the alignment Soft foot check: Soft foot function helps check if the machine is standing evenly on all feet; an essential check for good shaft alignment Easy for all users: A quick start guide and intuitive menus allows virtually any technician to quickly be familiar with the process. Full multi- lingual instructions are supplied on a CD

Order Code Description

C2558336 LASER ALIGNMENT TOOL

Belt Alignment Tool

7391

The SKF TMEB 2 aligns the pulleys in the grooves. With only two components, a laser- emitting unit and a receiver unit, the tool is easy and fast to attach with V-guides and powerful magnets. The three-dimensional target area on the receiver unit allows the easy detection of misalignment and shows if it is horizontal, vertical, parallel or a combination of misalignments. The operator can then easily make the appropriate adjustments.

Facilitates simultaneous adjustment of tension and alignment V-guides facilitate the alignment of a wide range of V-belt pulleys A maximum operating distance of 6 meters (20 ft) Special side adaptor

Order Code

C1464690

219