Pole manufacturing plant
A mechanised system of manufacturing, utilising a track mounted winding machine onto which both the glass filament rovings and resin bath are mounted, is applied. The filament winding machine is operated at calculated speeds whilst moving alongside the rotating mandrels to achieve maximum winding angles. BEKA Schréder GRP poles are manufactured through the filament winding process whereby continuous glass rovings are fed through a polyester resin bath and wound at an even tension onto a rotating mandrel, resulting in a mass to resin ratio of 70:30 and making full use of the tensile strength of the glass filament which is more than that of steel.
After the winding process has been completed, the glass filament structure is cured and then removed from the mandrel for surface preparation.
A base coat of polyester resin that complies with the requirements of SANS 1749 is applied, thereafter the cured structure is further machined to receive a final gel coat that is applied to a uniform thickness of between 250 and 500 microns.
In the mechanical assembly process, the pole is machined to provide holes for base plate hookbolts, cable entries, access door openings, as well as any other details required. Spigot arrangements and surface base plates, where required, are moulded into the pole and secured in position with locking screws.
Throughout the manufacturing process, the pole is subjected to stringent quality checks and tests.
Winding of glass filament Precision quality inspection
Machining of cured pole Access door detail
Finishing
Manufacturing
145