Construction Details The luminaire consists of a high-pressure die-cast aluminium body and a structured clear high impact acrylic diffuser. It is rectangular in shape and is designed to operate LEDs up to 18W.

SABS Marks The luminaire bears the SANS 60598-2-1 safety mark.

Ingress Protection The luminaire has a degree of protection that complies with SANS 60598-2-1. Lamp compartment: IP 65 The IP rating is certified by an SABS test report.

Body The body is manufactured from high-pressure die-cast aluminium, powder coated in the colour specified for added protection. It is suitable for surface mounting and allows for surface conduits to enter. A silicone sponge gasket is fitted into a groove in the body. Mounting holes, complete with nylon washers, can be provided on request. It is supplied with mounting lugs.

Diffuser The diffuser is manufactured from injection-moulded, high-impact, non-discolouring acrylic. It is structured on the inside and smooth on the outside. The diffuser is held to the body by four captive stainless steel Allen head screws. A tongue arrangement provided on the diffuser ensures the integrity of the IP rating.

Geartray The geartray is manufactured from 1.6mm galvanised and passivated steel, powder coated white to prevent corrosion and improve reflectance. It can be removed by merely loosening two screws.

Electrical Components All electrical components and lamp holders are mounted on the geartray. It is suitable for operation with the specified rating of the lamp on a 230V +3%/-10% 50Hz single phase system. All control gear components are removable and bear the relevant SABS mark. All screws, bolts and metal parts are stainless steel or non-corrosive material. Mains connections are by means of a suitable screw terminal block with a wire clamping contact. The luminaire is power factor corrected to ≥0,9.

392