Construction Details The luminaire consists of a spigot base, optical compartment with integral control gear and top cover and is designed to operate LEDs of up to 54W. It is also available in a wall bracket version.
SABS Marks The luminaire bears the SANS 475 performance mark and the SANS 60598-2-3 safety mark. Luminaire spigot entries comply with SANS 1088 - Table 1 for Type 2: ø76mm x 75mm.
Ingress Protection The luminaire has a degree of protection that complies with SANS 60598-2-3: Optical compartment: IP 65 The IP rating is certified by an SABS test report.
Top Cover The top cover is robustly constructed, weatherproof, hailproof, corrosion proof and vandal resistant. It is manufactured from glass-filled nylon and is firmly secured with a single injection moulded dome nut. It is coated white on the inside to improve the efficiency of the luminaire. A silicon sponge gasket is fixed into a groove to seal the top cover against the diffuser to IP 65.
Spigot Base The spigot base is manufactured from high-pressure die-cast aluminium and powder coated for added protection in the colour specified. The luminaire is secured to the pole by three M8 stainless steel grub screws.
Diffuser The injection moulded non-discolouring high-impact acrylic diffuser bowl is hexagonal in shape and is available in either a clear or opal version. It is smooth on the outside, but has internal prisms to reduce the direct glare component. A drip ridge is provided at the bottom edge to prevent direct rain water contact with the gasket.
Electrical Components The control gear is incorporated inside the luminaire and mounted on a removable gear tray. The nominal voltage is rated at 198-264V 50Hz single phase. All control gear components are removable and bear the relevant SABS marks. All internal wiring is Teflon® coated with protective sleeving to prevent damage by possible abrasion. All screws, bolts and metal parts are stainless steel or of non-corrosive material. Mains connections are by means of a suitable screw terminal block with a wire clamping contact. The power factor is rated at ≥0,9.
210